Textile Spinning Process(Engineering > Textile Engineering ) Questions and Answers

Question 1. Anti rolling effect allows good relaxation of fibers, making it easier for teeth to
  1.    pick the material
  2.    release the material
  3.    detach the material
  4.    rotate the material
Explanation:-
Answer: Option B. -> release the material
Answer: (b).release the material
Question 2. First two pairs of intersecting rotating head drawframe have
  1.    large diameters
  2.    identical diameters
  3.    large and identical diameters
  4.    small and identical diameters
Explanation:-
Answer: Option C. -> large and identical diameters
Answer: (c).large and identical diameters
Question 3. When drawframes are equipped with herrison's cylinder, barrel cylinder and elastic nip, control of fibers is
  1.    delicate
  2.    delicate but powerful
  3.    weak
  4.    constant
Explanation:-
Answer: Option B. -> delicate but powerful
Answer: (b).delicate but powerful
Question 4. When material passes through feeler to drawing, mechanical memory rotates by
  1.    two-fourths of a turn
  2.    three-fourths of a turn
  3.    4 times of a turn
  4.    2 times of a turn
Explanation:-
Answer: Option B. -> three-fourths of a turn
Answer: (b).three-fourths of a turn
Question 5. Number of clothings available for Herrison's cylinder is
  1.    4
  2.    3
  3.    2
  4.    1
Explanation:-
Answer: Option C. -> 2
Answer: (c).2
Question 6. Teeth on rollers in intersecting rotating disks are inclined in direction
  1.    opposite to rotation
  2.    same as rotation
  3.    perpendicular to rotation
  4.    changing accordingly
Explanation:-
Answer: Option A. -> opposite to rotation
Answer: (a).opposite to rotation
Question 7. Barrel cylinders with elastic nip have a rubber section which is
  1.    thicker from middle
  2.    thinner from middle
  3.    thicker from center
  4.    thinner from center
Explanation:-
Answer: Option B. -> thinner from middle
Answer: (b).thinner from middle
Question 8. Mechanical memory in mechanical draft autoleveller is a
  1.    roller
  2.    rod
  3.    disk
  4.    plate
Explanation:-
Answer: Option C. -> disk
Answer: (c).disk
Question 9. Higher speed of teeth tips of controller than base speed allows speed of control device to be
  1.    constant
  2.    variable
  3.    slow
  4.    high
Explanation:-
Answer: Option B. -> variable
Answer: (b).variable
Question 10. Heads per machines in Herrison-small barrel cylinders are
  1.    4
  2.    6
  3.    3
  4.    2
Explanation:-
Answer: Option A. -> 4
Answer: (a).4
© Lakshya_Education.com, All Right Reserved.
Contact Us services