Slope And Deflection(Mechanics Of Materials ) Questions and Answers
Question 1. The maximum deflection in cantilever beam of span “l”m and loading at free end is “W” kN.
Wl³/2EI
Wl³/3EI
Wl³/4EI
Wl²/2EI
Explanation:-
Answer: Option B. -> Wl³/3EI Answer: (b).Wl³/3EI
Question 2. Slope in the beam at any point is measured in ____________
Degrees
Minutes
Radians
Metric tonnes
Explanation:-
Answer: Option C. -> Radians Answer: (c).Radians
Question 3. A simply supported beam of span as shown in the figure is subjected to a concentrated load w at its metre span and also to a uniformly distributed load equality w what is the total diffraction it its midpoint.
18 Wl³ /384 EI
13 Wl³/ 384 EI
5 Wl³/ 384 EI
18 Wl³/ 384 EI
Explanation:-
Answer: Option B. -> 13 Wl³/ 384 EI Answer: (b).13 Wl³/ 384 EI
Question 4. Which of the following method is not used for determining slope and deflection at a point?
Moment area method
Double integration method
Isoheytal method
Macaulay’s method
Explanation:-
Answer: Option C. -> Isoheytal method Answer: (c).Isoheytal method
Question 5. Elastic curve is also known as __________
Refraction curve
Reflection curve
Deflection curve
Random curve
Explanation:-
Answer: Option C. -> Deflection curve Answer: (c).Deflection curve
Question 6. In simply supported beam deflection is maximum at ____________
Midspan
Supports
Point of loading
Through out
Explanation:-
Answer: Option A. -> Midspan Answer: (a).Midspan
Question 7. ____________ is the best example for accelerator (admixture).
Sulphonated formaldehyde
Calcium chloride
Sulphonated naphthalene
Polyglycolesters
Explanation:-
Answer: Option B. -> Calcium chloride Answer: (b).Calcium chloride
Question 8. Calculate the maximum deflection of a simply supported beam if the maximum slope at A is 0.0075 radians and the distance of centre of gravity of bending moment diagram to support A is 1.33 metres.
9.975 mm
9.5 mm
9.25 mm
9.785 mm
Explanation:-
Answer: Option A. -> 9.975 mm Answer: (a).9.975 mm
Question 9. _____________ is used to reduce the time for hardening of concrete.
Accelerators
Super plasticizer
Retarder
Air entraining admixture
Explanation:-
Answer: Option C. -> Retarder Answer: (c).Retarder
Question 10. Full form of LEED ________
Leadership in Energy and Efficiency Development
Leadership in Environmental and Energy Design
Leadership in Energy and Environmental Design
Leadership in Efflorescence and Energy Demand
Explanation:-
Answer: Option C. -> Leadership in Energy and Environmental Design Answer: (c).Leadership in Energy and Environmental Design